Virzienu releji

The m-Flash is by far the most compact load independent flasher relay on the market.Nothing comes close in size and simplicity! The m-Flash flasher unit substitutes all conventional flasher relays.All advantages summarized:- ultra compact and light - in essence just a piece of cable attached to a tiny, candy-sized device - ideal for custom bikes and mods with little mounting space - bulky conventional relays or load resistors are a thing of the past- the wiring can be placed into the handle bar or frame tubes or into the wiring harness- almost load independent (min. 1 Watt)- completely implemented using digital semiconductor technology. microprocessor controlled No mechanical workings, no spools, no electric contacts- consistantly constant and correct flasher frequency and suited for almost all LED turn signal lights, all micro and halogen turn signal lights as well as all 10-watts and 21-watts turn signal lights- e. g. works with 4 turn signal lights or 2 handle bar end turn signal lights- immediate loss free and brighter illumination of all turn signal lights- utterly hassle-free connection using only two cables - just connect in series- completely water tight and vibration resistant because of the moulded-in construction- short circuit proof, automatic overload protection, switches power up to 100 W.- no heat generation while operating- only 5 - 18 V operating voltage required- also applicable for 6 V turn signal lights- quality 'made in Germany' - by motogadgetDimensions:Casing (L x W x H): 18 mm x 13 mm x 9.5 mmConnector cable length: approx. 2 x 50 mmWeight: approx. 4 gNotesa) The m-Flash substitutes a conventional flasher relay. This flasher relay usually is implemented BEFORE the indicator switch.The most convenient way to mount the m-Flash is to simply search and replace the original relay.b) The m-Flash can NOT replace the push-button controls of a push-button instrument. Please refer to our m-Relay+ if you are looking for a flasher relay for push-buttons.c) Newer Harley-Davidson model series use a special module to control the flasher controls (TSM/TSSM). These modules can NOT be replaced or complemented by the m-Flash.Delivery contents: 1 pieceAttention: If you are looking for a flasher relay with automatic deactivation please refer to our m-Stop series!