1. MARKA 2. GADS 3. MODELIS

Sealants + Remover

LIQUI MOLY Cleaning fluid Motorbike Engine Flush, 250ml

kods: 860-511
ražotājs: LIQUI MOLY
On request
cena 13.95
Preču cena norādīta ar iekļautu PVN 21%.
Norādītā cena ir spēkā, pasūtot preci 29.03.2024.
Liqui Moly Motorbike Engine Flush, 250 mlSuited for motorcycles with four-stroke gasoline engines.Cleaning fluid for clearing the engine interior of troublesome deposits. Dissolves sludge and lacquer formers. All types of oil-soluble and oil-insoluble residues are brought into suspension and removed during the next oil change. An engine which has been cleaned of deposits and contamination and which is then filled with fresh oil not contaminated with old impurities can develop its full performance characteristics.Properties- cleaning and care- simple to use- does not attack common sealing materials- restores the engine to its original performance- tested for catalytic converters- long engine service life- highly economicalTechnical data:Color / appearance = yellow, cloudyForm = liquidBase = additive, carrier liquidViscosity at 40 Ā°C = 24,12 mmĀ²/sFlash point = 61 Ā°CPour point = -45 Ā°COdor = characteristicDensity at 20 Ā°C = 0,805 g/cmĀ³Areas of application:Flushes out and cleans the oil circuits of motorcycles with four-stroke gasoline engines. The frequency of use is dependent on the degree of contamination of the oil circuit and on the quality of the oil used.Application:One 250 ml can is sufficient for up to 4,5 liters of oil. Add Motorbike Engine Flush to the motor oil at running temperature before changing the oil. After adding the product, allow the engine to idle for approx. 10 minutes. Then change the oil and the filter. Motorbike Engine Flush is compatible with all commercially available motor oils. Suitable for use on motorbikes with wet clutches.Delivery contents: 1 piece, 250 mlNote:Our information is based on thorough research and may be considered reliable, although not legally binding.